R. Millett, J. Wheeldon, T. Hall, and H. Schriemer [1,2]
 Centre for Research in Photonics, School of Information Technology and Engineering, University of Ottawa, Canada
 Centre for Research in Photonics, Dept. of Physics, University of Ottawa, Canada
A 2D multiphysics model has been developed to simulate heterojunctions separating abruptly doped semiconductor layers of different dopant concentrations. Numerical results are presented for the case of nN, pN and PpN heterojunctions, and a general procedure for simulating multiple heterojunctions is described.
J. Cheng, K.V. Sharp, and M.M. Mench
The Fuel Cell Dynamics and Diagnostics Laboratory and the Microscale Flow Laboratory, Department of Mechanical and Nuclear Engineering, Pennsylvania State University
The dynamics of fuel cell coolant flow with charged nanoparticles were modeled using COMSOL Multiphysics. A computational fluid dynamics physicochemical model of the multi-phase coolant flow has been formulated. For nanoparticles in the fluid, electrokinetic force, hydrodynamic force, and buoyancy forces have been taken into account for the prediction of electrodeposition rate onto channel ...
Vibrational Analysis using Wavelet Techniques coupled with Wing Structural Modeling of the Pathfinder Plus
C. Smith, and C.M. Akujuobi
Center of Excellence for Communication Systems Technology Research, Texas
The motivation for this work is to explore the combination of a multiphysics COMSOL model of the wing of the Pathfinder Plus research aircraft with a wavelet-based vibration detection scheme. COMSOL Multiphysics is utilized to model the physics of the aerodynamics that produce vibration in the wing structure of the Pathfinder Plus. Next, three Daubechies wavelets are used to detect the ...
Yuhua Duan1,2, Dan C. Sorescu1 and J. Karl Johnson1,3
1National Energy Technology Laboratory, 2Parsons Project Services Inc.,3Department of Chemical Engineering
Microwave sintering has been applied to a wide variety of, and recent experimental results have showed that for semi-metal or magnetic materials, the magnetic field (H) can have a significantly larger contribution than the electric field (E) during sintering. We have employed COMSOL Multiphysics to simulate the sintering process by adding the magnetic field contribution into the heating source. ...
University of South Carolina
In this presentation we introduce the concept of Electrochemical Engineering through simulations in COMSOL Multiphysics. Our special case studies are: • a Parallel Plate Electrochemical Reactor, • a Rotating Ring Disk System, • a 3D Lithium Ion Battery, • a Portable Power System, • a Corroding Surface. These examples are all industrial ones, which shows the power of using ...
This presentation summarizes three different types of modeling using COMSOL Multiphysics. It is divided into three parts: Compressible flow, Multiphase flow, and Plasma Simulations. For the first part, we perform a special case study of the Mass Flow Verifier. A Mass Flow Verifier validates the accuracy of a Mass Flow Controller by measuring the rate of change of pressure in a fixed volume. ...
R. Malek-Madani, and K. McIlhany
Mathematics Dept., United States Naval Academy
The equations that govern motion in oceans and estuaries form a system of nonlinear partial differential equations for velocity, temperature and salinity fields set in complex bathymetries. A hierarchy of intermediate qualitative models have been proposed to help investigators understand the impact of wind stress, Coriolis force, and viscosity. We will present an analysis of these models ...
S.D. Ekpe, F. Jimenez, and S.K. Dew
University of Alberta, Edmonton
This work is focused on the coupling of a Monte Carlo code with COMSOL Multiphysics conduction/convection, and electrostatic modules in solving fluid-Poisson model for the plasma properties for a practical DC magnetron low pressure plasma discharge. The magnetostatic module was used in calculating the required magnetic field.
C. Devals, A. Fuxman, F. Bertrand,, J.F. Forbes, and R.E. Hayes
 École Polytechnique de Montréal,
 University of Alberta
The combustion of lean methane in a catalytic flow reversal reactor (CFRR) is studied using COMSOL Multiphysics and a 2D continuum model. This model is based on mole and energy balance equations for the solid (the inert and catalytic sections of the reactor) and the fluid phases. The results show the impact on the methane conversion and the maximum temperature in the reactor of key ...
S.A. Lottes, and R.W. Lyczkowski
Argonne National Laboratory
The main focus of this paper is the modeling, simulation, and analysis of the CaBr2 hydrolysis reactor stage in the Calcium-Bromine thermochemical water splitting cycle for nuclear hydrogen production. One concept is to use a spray reactor of CaBr2 into steam. Given the large heat reservoir contained in a pool of liquid CaBr2 that allows bubbles to rise easily, using a bubble column for the ...