Video Gallery

    COMSOL Multiphysics®
  • Electromagnetics
  • Structural & Acoustics
  • Fluid & Heat
  • Chemical
  • Multipurpose
  • Interfacing

Featured Videos

Clear All

Duration: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 7:37

LiveLink™ for PTC Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces. In this step-by-step instructional video, you will ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

First
Previous
1–15 of 105

Duration: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 7:37

LiveLink™ for PTC Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

Duration: 12:36

Reactive Solute Transport: Coupling Subsurface Flow and Geochemical Processes

This video, produced by AMPHOS 21, demonstrates the simulation of a deep geological repository for radioactive waste management. You will see how subsurface flow and chemical reactions between the ...

Duration: 8:36

Simulating a Magnetic Lens: Setting up and Solving the Model

The magnetic field surrounding a coil is used to focus electron beams. The particle trajectories in the magnetic lens are computed using the Particle Tracing Module. If you are interested in ...

Duration: 4:23

Creating 2D Models from Cross Sections of 3D Geometries

COMSOL Multiphysics has a great feature for creating 2D models from cross sections of 3D geometries. 3D models can have long solution times and take up lots of computer memory. This feature has been ...

Duration: 12:00

Deep Excavation Simulation Tutorial

This deep excavation tutorial shows the modeling process of a 26-meter excavation using the COMSOL Multiphysics Geomechanics Module. A parametric sweep is used to simulate the excavation steps in ...

Duration: 7:37

LiveLink™ for PTC Pro/ENGINEER® Video Tutorial

This video tutorial demonstrates the synchronization and modification features of LiveLink™ for PTC Pro/ENGINEER®.

Duration: 7:10

Performing a Multibody Analysis on a Double Pendulum

You can perform a multibody analysis to determine the kinematics and dynamics of objects, such as displacement, velocity, and reaction forces.

In this step-by-step instructional video, you will ...

Duration: 13:45

Shell and Tube Heat Exchanger Model Tutorial

This video shows how to build a working model of a cross-flow, one pass, shell and tube heat exchanger for the purpose of analyzing the heat transfer coefficient of the design as well as the tube ...

Duration: 10:51

Particle Tracking in a Laminar Static Mixer

This video shows you how particle tracking in a laminar static mixer can be simulated with COMSOL Multiphysics and the Particle Tracing Module. Using the Particle Tracing for Fluid Flow interface ...

Duration: 6:10

Thermal Stress Analysis of a Turbine Stator Blade

Axial turbomachines, commonly found in aircraft engines such as turbojets or turbofans, typically incorporate sequential pairs of rotating and stationary blades, named stages.The turbine located ...

Duration: 1:09

How to Export STL Files from COMSOL for 3D Printing

COMSOL Multiphysics enables the export of geometries as STL files. There are many uses for these STL files, but the one we highlight in this video is 3D Printing. If you have access to COMSOL ...

Duration: 1:53

Structural Mechanics: The Rigid Connector Feature

When modeling structural mechanics in COMSOL, there are often geometric entities that are not significantly affected during a structural analysis. This occurs when rigid bodies exist as part of an ...

Duration: 1:49

Structural Mechanics: Adding Thermal Stress to a Model

Heat is, or should be, involved in most every modeling application and example. Structural mechanics is not an exception. When heat is applied to a structural entity, deformation will occur due to ...

Duration: 2:22

Structural Mechanics: Adding Initial Strain to a Model

Models created in COMSOL Multiphysics often represent real-life situations in which initial stresses and/or strains are present before outside forces and loads are applied. This tutorial video lays ...

Duration: 5:13

Chapter 3: Advanced Visualization Techniques in Postprocessing

Tutorial on how to view the simulation results of a model with periodicity over an area extending beyond that of the original geometry, creating a more intuitive visualization for a periodic model. ...

Duration: 8:57

Chapter 2: Advanced Visualization Techniques in Postprocessing

Learn how to create a plot using the Mirror, Extrusion, and Sector Data Sets to visualize the results from a model with symmetry. A demonstration is also given of how to chain together data sets to ...

First
Previous
1–15 of 105