## Optimizing Lubricated Systems with Numerical Simulation

##### Thomas Forrister July 11, 2019

Experts at SIMTEC designed a lubricated mechanical contact using numerical modeling and built an application for optimizing the use of lubrication in rolling and sliding bearings.

### Predicting the Unpredictable: Simulating Earthquake Mechanics

##### Brianne Christopher July 5, 2019

In case of an earthquake, people regularly practice hiding under their desks. Another way to prepare? Using response spectrum analysis to determine the structural stability of a building subject to this type of seismic event.

### Analyzing Vibrations in Rotating Machinery Due to Bearing Misalignment

##### Prashant Srivastava June 25, 2019

You can use structural analysis to compare the angular velocity, axial displacement, and bearing reaction moment on the shaft for rotating machinery with aligned and misaligned bearings.

### Introduction to Modeling Acoustic-Structure Interactions in COMSOL®

##### Jinlan Huang June 12, 2019

To model an ASI problem, you need to account for the behavior of elastic waves in solids, pressure waves in fluids, and their interaction. The COMSOL® software includes interfaces for doing so.

### Frequency Response of Mechanical Systems

##### Henrik Sönnerlind June 5, 2019

Read this blog post for a detailed look at damped mechanical systems, a guide to setting up frequency-response analyses in COMSOL®, and a discussion of how to interpret your results.

### How to Use Lumped Elements to Model a Mechanical System

##### Ajit Bhuddi May 29, 2019

Modeling a large, complex system? You may want to simplify configurations in the model setup to better understand it, but how? Enter the Lumped Mechanical System interface in COMSOL Multiphysics.

### Analyzing Slope Stability Through the Shear Strength Reduction Method

##### Emily Ediger May 28, 2019

Dams that are poorly designed or constructed are likely to fail. However, geotechnical engineers can account for the stability and reliability of a dam long before the structure is even built.

### Evaluating the Impact of Bearing Misalignment on Rotor Vibration

##### Bridget Paulus May 14, 2019

Bearings are found in devices ranging from MEMS and turbines to electric motors and even ships. How we account for a bearing’s misalignment (and the resulting rotor vibration) depends on its use.

### Introduction to Numerical Integration and Gauss Points

##### Henrik Sönnerlind May 1, 2019

In this comprehensive blog post, we go over the theory behind numerical integration, Gaussian quadrature, Gauss points, weak contributions, and much more.

### Verification Model: Postbuckling Analysis of a Spherical Cap

##### Thomas Forrister April 16, 2019

Think about what happens to a soda or beer can when you crush it. This phenomenon is called buckling, in which compressive stress causes sudden failure in a structure.

### Modeling Heat Transfer in Thin Layers via Layered Material Technology

##### Claire Bost April 1, 2019

We answer some questions you may have about the Layered Material functionality in the COMSOL® software: What does it do? How do you update existing models? How do simulations benefit from it?