The Application Gallery features COMSOL Multiphysics tutorial and demo app files pertinent to the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use tutorial models and demo apps with step-by-step instructions for how to create them yourself. The examples in the gallery serve as a great starting point for your own simulation work.

Use the Quick Search to find tutorials and apps relevant to your area of expertise. Log in or create a COMSOL Access account that is associated with a valid COMSOL license to download the MPH-files.


Radially Polarized Piezoelectric Transducer

This tutorial model shows how a user-defined coordinate system can be used to create any type of directional polarization of a piezoelectric material. Results are shown for the case of radial polarization of a piezoelectric disk. The piezoelectric material is PZT-5H. The example shows a static analysis. Visualization of the cylindrical coordinate system as well as the stress/strain in that ...

Sedan Interior Acoustics

This is a model of the acoustics inside a sedan, that is inside a typical hard-top family car. The model sets up sources at loudspeaker locations as well as impedance conditions to model soft absorbing surfaces (seats and carpet). The model results in plots of the pressure, sound pressure level, and intensity inside the car. The frequency response at given points inside the cabin are also ...

Sonic Crystal

Phononic and sonic crystals have generated rising scientific interest for very diverse technological applications. These crystals are made of periodic distributions of scatterers embedded in a matrix. Under certain conditions, acoustic band gaps can form. These are spectral bands where propagation of waves is forbidden. This model first analyzes as sonic crystal and determines its band ...

Open Pipe

In this model, sound created by a vibrating piston radiates through a baffled pipe. The impedance is measured and then used in an impedance boundary condition that replaces the surrounding air domain. This technique can be employed to reduce solution time and memory usage for large models with pipe openings.

Spherical Piezoacoustic Transducer

This tutorial provides a step-by-step instruction to setup a fully-coupled 3D structural-acoustic interaction problem. Interaction between a vibrating spherical piezoelectric structure with the surrounding fluid media is considered. The piezoelectric material PZT-5H from the materials library is used. Instructions on how to create a radially polarized piezoelectric material in spherical ...

Piezoelectric Tonpilz Transducer with a Prestressed Bolt

A tonpilz transducer is used for relatively low frequency, high power sound emission. It is one of the popular transducer configurations for SONAR applications. The transducer consists of piezoceramic rings stacked between a head mass and a tail mass which are connected by a central bolt. This example shows how to incorporate the effect of a pre-tension in the bolt. The bolt geometry is ...

Lumped Receiver Connected to Test Set-up with a 0.4cc Coupler

In this model a Knowles ED23146 receiver (miniature loudspeaker) is connected to a test set-up consisting of a 50 mm (1 mm diameter) earmold tube and a so-called 0.4-cc coupler. The receiver is modeled using a lumped spice network and connected to the finite element domain at the tube inlet. The response at the measurement microphone in the coupler as well as the electric input impedance to the ...

Test Bench Car Interior

Sound is generated by a point source located in the wall of this test bench car interior. The sound pressure level response at a point of measurement is investigated for a range of frequencies and four different mesh resolutions. The model is first solved with the default direct solvers. Finally, it is shown how to set up an iterative solver which is efficient for large problems and the finest ...

Organ Pipe Design

The Organ Pipe Designer allows you to study the design of an organ pipe and then play the sound and pitch of the changed design in a user-friendly app. The pipe sound includes the effects of different harmonics with different amplitudes. The organ pipe is modeled using the Pipe Acoustics, Frequency Domain interface in COMSOL Multiphysics. The simulation app allows you to analyze how the first ...

Sonic Well Logging

This model demonstrates how to simulate a piezoelectric transducer as both a sound transmitter and a receiver in a well logging setup. Other applications of this setup are, for example, in the field of nondestructive testing. A transmitting transducer is connected to an electrical circuit which is set up to send out a pulse as a detecting signal and also pick up the signals that come back to the ...

1 - 10 of 69 First | < Previous | Next > | Last