The Application Gallery features COMSOL Multiphysics® tutorial and demo app files pertinent to the electrical, structural, acoustics, fluid, heat, and chemical disciplines. You can use these examples as a starting point for your own simulation work by downloading the tutorial model or demo app file and its accompanying instructions.

Search for tutorials and apps relevant to your area of expertise via the Quick Search feature. To download the MPH-files, log in or create a COMSOL Access account that is associated with a valid COMSOL license. Note that many of the examples featured here can also be accessed via the Application Libraries that are built into the COMSOL Multiphysics® software and available from the File menu.


Evaporative Cooling of Water

This tutorial shows how to couple three physics interfaces to model evaporative cooling. The effects need to be taken into account are heat transfer, transport of water vapor and fluid flow. User-defined expressions are used to implement the source term for the water vapor and evaporative heat source, as well as the moist air feature to accurately describe the material properties.

Voltage Induced in a Coil by a Moving Magnet

A magnet moving axially through the center of a coil will induce a voltage across the coil terminals. One practical application of this is in shaker flashlights, where the flashlight is vigorously shaken back and forth, causing a magnet to move through a multi-turn coil, which provides charge to the battery. In this model, the motion of a magnet through a coil is modeled, and the induced ...

3D Coil Types in COMSOL Multiphysics

This is a collection of various types of 3D volumetric coils available in COMSOL Multiphysics version 5.2a. In this entry, we illustrate how to use the *Single Conductor Coil*, *Homogenized Multi-Turn Coil*, *Lumped Port*, and *External Current Density* features for modeling 3D coils. Both DC (Stationary) and AC (Frequency Domain and Time Domain) modeling strategies are discussed. A series of ...

Shell-and-Tube Heat Exchanger

Shell-and-tube heat exchangers are commonly used in oil refineries and other large chemical processes. In this model, two separated fluids at different temperatures flow through the heat exchanger, one through the tubes (tube side) and the other through the shell around the tubes (shell side). Several design parameters and operating conditions influence the optimal performance of a shell and ...

Frequency Selective Surface, Periodic Complementary Split Ring Resonator

Frequency selective surfaces (FSS) are periodic structures with a bandpass or a bandstop frequency response. This model shows that only signals around the center frequency can pass through the periodic complimentary split ring resonator layer.

Capacitive Pressure Sensor

A capacitive pressure sensor is simulated. This model shows how to simulate the response of the pressure sensor to an applied pressure, and also how to analyze the effects of packing induced stresses on the sensor performance.

Heating Circuit

Small heating circuits find use in many applications. For example, in manufacturing processes they heat up reactive fluids. The device used consists of an electrically resistive layer deposited on a glass plate. The layer causes Joule heating when a voltage is applied to the circuit. The layer’s properties determine the amount of heat produced. This multiphysics example simulates the ...

Acoustic Transmission Loss through Periodic Elastic Structures

In this model, two fluids are separated by a solid elastic structure. An acoustic pressure wave impacts the structure resulting in a reflected wave and a wave transmitted with a loss through the structure. This model investigates the transmission loss through the structure. The effects of incident angle, frequency, and dampings are studied. Important features used: Acoustic-structure ...

Axisymmetric Transient Heat Transfer

This is a benchmark model for an axisymmetric transient thermal analysis. The temperature on the boundaries changes from 0 degrees C to 1000 degrees C at the start of the simulation. The temperature at 190 s from the anlysis is compared with a NAFEMS benchmark solution.

Fluid-Structure Interaction in a Network of Blood Vessels

This model refers to a portion of the vascular system of a young child - the upper part of the aorta artery. The blood vessels are embedded in a biological tissue (the cardiac muscle) and, during the flow of blood, pressure is applied to the internal surfaces producing deformation of the vessel walls. The complete analysis consists of two distinct but coupled procedures: a fluid-dynamics ...